Endotracheal tubes ETTs are mostly made of PVC and are single-use. Here the standard type is most widely used version of an endotracheal tube.
Item NO.:
TW8604Payment:
30% in advance, balance before shipmentProduct Origin:
ChinaColor:
transparent whiteShipping Port:
mainly Xiamen or Shanghai, any port in ChinaLead Time：
30daysAirway management endotracheal tube cuff
Standard cuffed endotracheal tubes available in a wide range of sizes and configurations
Our airway management products have been a trusted brand for more than 10 years. Xiamen Winner is dedicated to providing the highest quality products for the best possible value.
Highlights
-Available both with cuff and without cuff
-Made of transparent thermosensitive PVC that softens at body temperature
-With high-volume, low-pressure cuff
-Murphy eye to avoid complete respiratory obstruction
-Radiopaque line throughout the tube for X-ray visualization
Item No.
-TW8604: oral/nasal
-Size: 2.0# (uncuffed only), 2.5#, 3.0#, 3.5#, 4.0#, 4.5#, 5.0#, 5.5#,
-6.0#, 6.5#, 7.0#, 7.5#, 8.0#, 8.5#, 9.0#, 9.5#, 10.0#
Package
-Sterile, individual paper-poly pouch
Speciality
*1.The cuff makes intubations simpler and is opaque for easy visualization.
*2.A special coating makes it smooth and non-traumatising, making it easy to both put on and take off.
*3.Both the internal/outside diameter and the length are indicated on the tube respectively.
*4.Single, sterile packs
Packaging & Shipping
*Carton Size: 42X38X32cm
*Q’ty/ctn: 100pcs/ctn
*Gross Weight: 7KGS
*Customized Accept!
FAQ
Is there any marking on endotracheal tube?
Depending on type and manufacturer ET tubes have several markings on the outside. The ones pretty much all ET tubes have is the size (measured as the inner diameter in mm) and length markings (measured in cm from the tip). In addition, some manufacturers print the outer diameter (in mm) on the tube as well.
Silicone head harness for anesthesia is intended to fix the mask on patient’s face during pulmonary resuscitation.
SEBS resuscitation bag single use ambu set is a handheld tool that is used to deliver positive pressure ventilation to any subject with insufficient or ineffective breaths.
The nebulizer cup adopts a brand-new design with fog shield added. This fog shield will help to get better size of the atomized particles which can achieve ideal treatment.
A non-rebreather mask is a medical device that helps to deliver oxygen in emergency situations. One-way valves prevent exhaled air from reentering the oxygen reservoir.
Washing hands has become a several-times-a-day necessity. Our automatic sensor liquid soap dispenser makes it super easy and fun. Just hold out your hand and a dab of soap instantly appears.
CPR training mask is a cost effective tool for classroom training of CPR, and provides an alternative to the use of a traditional CPR resuscitator with one-way valve.
CPLA Plastic Cutlery-Crystallize Polylactic acid (CPLA) is produced from modified PLA. Polylactic acid (PLA) is produced from renewable feedstock (cornstarch).
Continuous positive airway pressure mask is used with CPAP machine. CPAP machines use mild air pressure to keep the airways open, and are typically used by patients who have breathing problems during sleep.
IPv6 network supported
English
فارسی
français
Deutsch
русский
italiano
español
português
العربية
Türkçe
